Eagle Access Control Systems Eagle-E7 Manual de usuario descargar pdf (Pagina 4)

Eagle ® ICS System – Unicard CR211 User & Installation Instructions Page 4 of 17

Relay 1 : is normally used to open the door.

Relay 2 : could be used for different functions :-

Alarm shunt, alarm panel on/off, duress alarm, open a second

door, manipulation blocking alarm, control a electronic lock / strike

or a door bell. Monostable relay function is normally used for door

opening, alarm shunt, duress alarm, door open alarm and blocking

alarm while bistable relay function is used for alarm on/off, and

door open during the day.

If the duress output is connected to a monitored intruder

alarm, please check compliance to relevant Police Force

policy.

Alarm function 8 : Controls the relationship and operation of relays

1 & 2.

The disable functions are:

< 0 > - No time control

< 1 > - Card disabled if PL2:19 PL2:20 is open circuit.

< 2 > - Card disabled if PL2:19 PL2:20 is closed

circuit.

User cards are programmed as follows :-

1 2 3 4 5 6 7 8 9 ... 16 17

Sin comentarios

Eagle Access Control Systems Eagle-E7 Manual de usuario Pagina 4