Eagle Access Control Systems Eagle-E7 Manual de usuario descargar pdf (Pagina 14)

Eagle Access Control Systems, Inc. www.EagleOperators.com

LOOP DETECTORS

INSTALLATION

STEP 1. Using Removable Connector, Connect wire (twisted pair) from each in-

ground loop as indicated.

STEP 2. Plug in Eagle Loop Detector to

Corresponding In-ground Loop as indicated

(USE ONLY EAGLE BRAND PLUG-IN

LOOP DETECTORS)

TEP 3. Eagle Loop

Detectors automatically ad-

just for proper

sensitivity.

Note: Eagle Brand Plug-in Loop De-

tectors are designed as “fail-Safe.”

Wire (Twisted Pair) From In-ground Loop Connects to Proper LOOP WIRE INPUT

1 2 3 4

Eagle Loop Detectors Plug into Corresponding LOOP DETECTORS CONNECTIONS

1 2 3

LED INDICATORS

Green LED (Upper LED)

• Steady On = Power

• Fast Blink = Shorted Loop Wire

• Slow Blink = Open Loop

Red LED (Lower LED)

• On = Vehicle Detection

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Eagle Access Control Systems Eagle-E7 Manual de usuario Pagina 14